The Volume of my C2 is controlled by a Yamaha FC-7 Pedal.
System-Menu 9 set to "YA")
As the Swellpedal-Output sends Mididata (Controller 04) I should be able to
control the Volume of my Roland-Modul "Fantom XR" with that same Pedal.
Unfortunately this does not work! It works well with other Keyboards, but not with
the C2. Can anyone help?
Volume Control for external Midi-Device
-
- Posts: 2
- Joined: 14 Jul 2016, 20:28
- 7
- Your Nord Gear #1: Nord C2
- jfenton
- Patch Creator
- Posts: 357
- Joined: 03 Apr 2016, 18:21
- 8
- Your Nord Gear #1: Nord Stage 2 EX
- Has thanked: 24 times
- Been thanked: 102 times
Re: Volume Control for external Midi-Device
Roland probably uses either controller 9 or 11. Unless you can program the C2D to send that instead of 4, then you are likely out of luck. Looking at the manual, I don't think you can. You would likely need to put some sort of Midi mapping/translating software or device between the C2D and the Roland Sound Module.
I use Bome SW for this type of thing (although I have neither a C2D or Roland Fantom XR.
www.bome.com
I use Bome SW for this type of thing (although I have neither a C2D or Roland Fantom XR.
www.bome.com
Keyboards:
- NS2 EX Compact 73
- Hammond SK2
- Roland VCombo VR-09
- Roland A800-Pro
- Behringer Motor 49
- Alesis Q88
-
- Posts: 2
- Joined: 14 Jul 2016, 20:28
- 7
- Your Nord Gear #1: Nord C2
Re: Volume Control for external Midi-Device
Thanks for your advice. The Fantom XR has such a Midi-Matrix for Controllers, so my source would be controller 4,
destination would be 7 for the Volume or 11 for expression.
Unfortunately it still doesn't work.
I tried my FC-7 with the "Kingkorg". This Synth also sends the Pedalmessage with controller 04 and it worked perfectly.
Therefore I think the C2 is the problem. I also sent a message to the Clavia-Support, may be they know the problem.
destination would be 7 for the Volume or 11 for expression.
Unfortunately it still doesn't work.
I tried my FC-7 with the "Kingkorg". This Synth also sends the Pedalmessage with controller 04 and it worked perfectly.
Therefore I think the C2 is the problem. I also sent a message to the Clavia-Support, may be they know the problem.