Hi,
I consider to buy a Leslie 2101 MK II for my nord C2.
I have one question :
I've got the Half Moon with my Nord to control the speed of the Leslie.
If I plug my nord with a 11pin cable to the Leslie, is the half-moon going to control the Rotor of the Leslie instead of the simulation ?
Thank you for your advice !
5 posts
• Page 1 of 1
- Steff
- Posts: 3
- Joined: 10 Nov 2012, 17:19
- Location: Limoges, France
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord C2
Re: Half-moon switch and Leslie 2101 :?:
High level outputs, featuring quarter-inch as well as a 11-pin Leslie standard connectors allows you to connect directly to rotary speak- ers When using the 11-pin connector, the panel controls for rotation speed are transferred as well
(Nord C2D Manual, page 4)
So as long as also the 2101 responds to Leslie speed commands via the 11pin, as I assume it does, you should be OK.
(Nord C2D Manual, page 4)
So as long as also the 2101 responds to Leslie speed commands via the 11pin, as I assume it does, you should be OK.
Last edited by maxpiano on 13 Jan 2017, 13:22, edited 1 time in total.
-
maxpiano - Patch Creator
- Posts: 6188
- Joined: 27 Jun 2011, 13:29
- Location: Italy
- Country:
- Has thanked: 441 times
- Been thanked: 2178 times
- Your Nord Gear #1: Nord Stage 3
Re: Half-moon switch and Leslie 2101 :?:
Oh thanks !
I think it will work too but if someone has already done it.
I think it will work too but if someone has already done it.
- Steff
- Posts: 3
- Joined: 10 Nov 2012, 17:19
- Location: Limoges, France
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord C2
Re: Half-moon switch and Leslie 2101 :?:
As long as the simulation isn't running it will do both. You don't want to use a leslie sim with the real thing!
Also, here's a pinout guide for all leslie models that is useful for doing other things with older models, if you're handy with a soldering iron.
http://www.captain-foldback.com/Leslie_sub/pinouts.htm
Also, here's a pinout guide for all leslie models that is useful for doing other things with older models, if you're handy with a soldering iron.
http://www.captain-foldback.com/Leslie_sub/pinouts.htm
Nord C2, Nord Stage 2, Moog Sub37, Moog Minitaur
Hammond A100, Wurlitzer P200A
Hammond A100, Wurlitzer P200A
- ebowen4221
- Posts: 97
- Joined: 22 Mar 2012, 18:31
- Location: Moscow, Idaho
- Country:
- Has thanked: 0 time
- Been thanked: 17 times
- Your Nord Gear #1: Nord C2
- Your Nord Gear #2: Nord Stage 2
Re: Half-moon switch and Leslie 2101 :?:
ebowen4221 wrote:As long as the simulation isn't running it will do both. You don't want to use a leslie sim with the real thing!
Of course, I don't want a sim with a real Leslie !
- Steff
- Posts: 3
- Joined: 10 Nov 2012, 17:19
- Location: Limoges, France
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord C2
5 posts
• Page 1 of 1
Return to Nord C1 / C2 / C2D Organ Forum
Who is online
Users browsing this forum: No registered users and 10 guests