The Nord C1, C2 and C2D Organ Forum

C2 11 pin out to Motion Sound 145

Postby SteveCA » 27 Apr 2016, 21:48

Does anyone have schematics for using the 11 pin out on the Nord C2 to send audio and speed controls to a Motion Sound 145? I spoke to someone recently that told me he put together a cable with an 11 pin socket on one end, 1/4" audio out and leslie speed control on the other for easy hook up to a Motion Sound 145. With this setup you can use the onboard switches on the C2 to control leslie speed instead of shelling out the bucks for a half-moon switch.

Thanks,
Steve
SteveCA
 
Posts: 1
Joined: 27 Apr 2016, 21:40
Has thanked: 0 time
Been thanked: 0 time
Your Nord Gear #1: Nord C2

C2 11 pin out to Motion Sound 145


Sponsor
 

Re: C2 11 pin out to Motion Sound 145

Postby ebowen4221 » 27 Apr 2016, 22:36

I'm wondering what you're trying to gain by running the 11 pin out? The 11 pin out has a much hotter signal than what's needed to plug into the Pro-145. If you're hoping for the ability to control the rotor speed, you're in luck! The Pro-145 uses the same wiring as the C2, so if you have the nord half-moon, or one you've made, it'll work with organ and the speaker with no problems.
Nord C2, Nord Stage 2, Moog Sub37, Moog Minitaur
Hammond A100, Wurlitzer P200A
ebowen4221
 
Posts: 97
Joined: 22 Mar 2012, 18:31
Location: Moscow, Idaho
Country: United States of America
Has thanked: 0 time
Been thanked: 17 times
Your Nord Gear #1: Nord C2
Your Nord Gear #2: Nord Stage 2


Return to Nord C1 / C2 / C2D Organ Forum



Who is online

Users browsing this forum: No registered users and 10 guests