I have downloaded the Electro OS v3.04 but it won't install.
When I click it, it briefly begins to installs and then disappears
I also downloaded the Electro tool v3.00
I can't install this either. When I try I get the message:
"You can't open the application "Install Nord Electro Tool v3.00.exe" because Microsoft windows applications are not supprted on OS X"
I am on a 1 yo Mac book running OS X 10.9.1
Any help? I'd love to get the library working with my Electro again.
3 posts
• Page 1 of 1
- davo62
- Posts: 1
- Joined: 03 Feb 2014, 00:38
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Electro 2
Re: Trouble Installing Nord Electro OS v3.04
Isn't that error saying that you are trying to run a Windows .exe in OS X?
Did you try to download the Mac version?
Did you try to download the Mac version?
-
Mr_-G- - Moderator
- Posts: 4616
- Joined: 18 Aug 2012, 16:48
- Has thanked: 1475 times
- Been thanked: 1257 times
- Your Nord Gear #1: Nord Stage 2
Re: Trouble Installing Nord Electro OS v3.04
Electro 2 Tool software will not run on that OSX. Per the Nord website page from which you downloaded those applications (emphasis original):
Windows note: The Nord Electro 2 Tool Software is not compatible with Windows 7 64bit.
The 32bit version of Windows 7 and Windows Vista 64 bit is supported.
Mac users: The Electro 2 Tool is not compatible with OS X Lion (10.7+) as this OS no longer supports PowerPC/Rosetta-emulation.
OS X Snow Leopard (10.6.x) or older is required for the Electro 2 Tool to run.
Your instrument probably already has v3.04 OS installed; if EL 3.0 appears in the display, you're good. Count the number of times the decimal point at the end of the display blinks to confirm the 4.
Pablo
Windows note: The Nord Electro 2 Tool Software is not compatible with Windows 7 64bit.
The 32bit version of Windows 7 and Windows Vista 64 bit is supported.
Mac users: The Electro 2 Tool is not compatible with OS X Lion (10.7+) as this OS no longer supports PowerPC/Rosetta-emulation.
OS X Snow Leopard (10.6.x) or older is required for the Electro 2 Tool to run.
Your instrument probably already has v3.04 OS installed; if EL 3.0 appears in the display, you're good. Count the number of times the decimal point at the end of the display blinks to confirm the 4.
Pablo
bun fyah weh fyah fi bun
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 21 guests